Post 1 made on Tuesday March 6, 2012 at 12:27 |
I don't know what I did but my Marantz SR8002 no longer reacts to my Harmony 900's Blaster commands. My other devices (Motorola DCH3416 and Denon DVD-2500) react correctly to the Blaster. What's wierd is that when I reassign the Marantz to IR out of the 900, the Marantz works fine. When I set only the Marantz to the Blaster, and push the 900's buttons, the Blaster's activity light flashes and I can see IR flashes emitted by the Blaster and Mini. So I think I have the Harmony programmed correctly. Any ideas on how to correct this issue? I've already updated software and firmware (I'm unsure if maybe the upgrades created my problem). Thanks
|
|
Post 2 made on Thursday March 8, 2012 at 10:04 |
bedodot Lurking Member |
Joined: Posts: | November 2011 4 |
|
|
This is a known issue with the RF Blaster controlling Marantz receivers. It seems that Marantz receivers are overpowering the IR signals from the blaster
suggestions:
1. You may assign your Marantz receiver to mini-blaster and position it further away from the receiver. 2. You may have to learn the commands in RAW from the original remote of your Marantz receiver.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.