Hello I have more or less managed to configure my Hamony all but one
materials are accepted with the exception of my Blu-Ray Samsung BD-P1600 I
do not I'll configure later.
My problem is that I integrated all my materials like
Photo:

[Link: imageshack.us]


[Link: imageshack.us]

even define some programs, but the problem is that no matter
source selected when I press the stop button of the
remote control while it is right all the time which will turn off my TV
I tampered with anywhere I have no solution.
I wish I could turn off the hardware of my choice when I click on
the stop button on the remote control especially when it is the source of
it is selected on the ONE.
Also when you are on the interface of a material there for almost
all functions except the stop button.
If you have a walkthrough to help me thank you.

I presume what you call the "Stop" button is the "Off" button (that looks like a power button). The "Off" button is the global built-in "Off activity". The built-in "Off activity" is like an activity without any device, so it will turn off all device (that it turned on). If you need to turn off a device in device mode, you have to use its "PowerOff" or "PowerToggle" command (what you call the Stop function) that will be mapped to a soft key(s). You may have to scroll down until it/they appear on the LCD display. Note: You can map a device power command into the activity(ies) that use(s) the device.

The Harmony is an activity based remote. You should use the Device mode only for debugging & testing commands. If you find yourself going into device mode too often, then it's time to map that command into the desired activity(ies). In the activity customize buttons, you can map any command from any participating device to any button.

Notes: French vs. English
Activités = Activities
Dispositifs = Devices

Ensure that HDMI-CEC (AnyNet+) has been turned off on both the TV and the DVD player. Since these are both Samsung, they are probably doing a lot of setup/commands between them.