Your Universal Remote Control Center
RemoteCentral.com
Harmony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Harmony 1100
This thread has 3 replies. Displaying all posts.
Post 1 made on Tuesday April 19, 2011 at 01:34
MGallo3
Junior Member
Joined:
Posts:
April 2011
1
What cool things can I do with my Harmony 1100?
All advice is welcome!
(This is the first universal remote I have owned so I don't know much about them.)

Last edited by MGallo3 on April 19, 2011 01:43.
Post 2 made on Wednesday April 27, 2011 at 19:36
mak99
Lurking Member
Joined:
Posts:
July 2005
7
You can do whatever you want to most anything that is remote-controllable! We've had an 1100 for our main system since mid-last year, and have been very please with how customizable it is. I have our sidebar buttons programmed to operate the dimmer switch (Lutron Maestro IR) for movie watching modes, using the RF wireless extender.

Just make sure when you set up your Activities, that you know all the correct inputs your gear should be set to. You can also read the 1100 thread over at AVS Forums for lots of good info...

FWIW, I've been using the Harmony remotes for many, many years now, starting with the (pre-Logitech buyout) Harmony 659. Then upgraded to the 880, then the One, and now the 1100.

Good luck!
Post 3 made on Sunday June 19, 2011 at 15:34
rgatamaneni
Junior Member
Joined:
Posts:
June 2011
2
Hi mak99,
I have been using a URC MX500 and have been extremely happy with it. I just bought a Harmony 1100 just because of the look and feel and thought it would have more advanced features but I am very disappointed.

I like the activities concept but don't like some of the default behavious of the activities. I have an activity called watch DVD that does normal stuff like turn on AVR, projector, DVD player, set correct inputs etc and also dims the lights controlled by X10. While watching a movie, I would like to enable a sequence of commands (from 2 devices) to pause the dvd turn the lights on, after the break, I want to execute another sequence of commands to dim the lights, turn off lights completely and restart playing the DVD. While I am able to do that on my URC MX500 that is 6 years old using 3 different macros, I don't know how to do it using the harmony 1100. Inside the watch DVD activity, I cannot call another activity of program a button called "pause DVD" that brings on the lights and pauses the DVD. I could have another activity called "pause DVD" but execute that activity, but I cannot go back to watch DVD again without the remote reexecuting all the watch DVD sequence of commands.
How did you program the sidebar buttons ? DO you just have asingle command or multiple commands for the button ? If it is multiple commands, is it more than one device in the list of commands ?
Any help is greatly appreciated.
Thanks.
Post 4 made on Monday June 20, 2011 at 14:54
jlet
Super Member
Joined:
Posts:
March 2004
2,631
Unfortunately, the 1100 (and 900) does not support (yet) the activity sequence programming feature which would allow mapping a sequence of up to 5 commands (from any participating device) to a button. Also see post #2 of this thread: [Link: remotecentral.com]
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse