| Post 1 made on Thursday October 29, 2009 at 04:20 |
AndersDK New Member |
Joined:
Posts: | October 2009
8 |
|
|
Hi, anyone here has the ONE set up with a Dreambox? I have a DM7000 and the ONE knows it. But when I add my favorits, and uses them to change channel. Its seems like the IR signals isn't perfekt :( When using a favorits with the channel no. "223". It only gets some of the numbers to the Dreambox. Sometimes "22" and then it stops and somethimes only the "3" :( I know it meight be a setup in the timings of the IR signals and will proberbly try differnet settings in there. But if anyone in here already had a good setup with a dreambox, I would love to try your settings first.. :D
Thx
Anders
|
|
| Post 2 made on Thursday October 29, 2009 at 10:16 |
akirby Super Member |
Joined:
Posts: | March 2004
4,390 |
|
|
|
Try changing the inter-device and inter-key delays. If it's missing commands increase them. If it's sending commands too slowly (e.g. it's trying to send 2-2-3 but it sees the first 2 and tries to change to channel 2) then decrease them.
|
|
| Post 3 made on Friday October 30, 2009 at 03:36 |
AndersDK New Member |
Joined:
Posts: | October 2009
8 |
|
|
Thx for the reply akirby..
I used the "problem solver" in setup program. Started with raising the respon time to max "5", it was set to minium "0". Just to see the result :) now it responed very quick LOL Instead of typing "223" it typed"222223333" :) So I ended up with only having to raise the respond time to "1" And now it seems to work well.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
