| Post 1 made on Friday December 26, 2008 at 17:26 |
dubaidog Lurking Member |
Joined:
Posts: | December 2008
6 |
|
|
Is it possible to have a Harmony 1000 and 895 both speak to the same extender? My situation is this: I have a 5.1 setup in the living room, as well as a TV in the Kitchen. My control room is in between the two rooms. I also have a Smart-e A/V switcher doing the routing. Essentially, both rooms need the ability to control the same set-top boxes and devices in the control room. Is there a way to set up one remote, then "teach" the other the codes and RF frequency?
The 895 is the European equivalent of the 890 as far as I know. thanks for any help!
|
|
| Post 2 made on Saturday December 27, 2008 at 05:39 |
tankstage Lurking Member |
Joined:
Posts: | January 2007
9 |
|
|
Quick and simple answer No.
This is something I hoped would work when I first bought 2 895 units.
It seems this feature is available to our US cousins if they buy the 890pro but not the standard 890.
Tank
|
|
| OP | Post 3 made on Saturday December 27, 2008 at 06:18 |
dubaidog Lurking Member |
Joined:
Posts: | December 2008
6 |
|
|
Thanks, tank. I'll get another extender and set of blasters. Going to be a wire-a-thon in the control room.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
