| Post 1 made on Friday December 5, 2008 at 09:19 |
xtrips Lurking Member |
Joined:
Posts: | February 2007
4 |
|
|
Hello,
I just broke the charger unit of my Harmony 890 (the part that plugs in the wall outlet). The original one outputs an 8V current at low amperage.
Can I use some other transformer that outputs 7.5V or 9V?
Of course I know an original Logitech charger would be better.
But can I do any damage to the remote with such voltages?
If not what would be better, 7.5V or 9V?
Thank you
|
|
| Post 2 made on Friday December 5, 2008 at 16:29 |
drguru Lurking Member |
Joined:
Posts: | December 2008
2 |
|
|
I have a Harmony 880, which probably uses the same charger. The output of the power cord is 8volts 500 ma. I use a universal power supply set a 7.5 volts 500 ma and it works without any problem. The problem is to find a plug that will fit into the socket on the back of the charger. Most universal transformers have several connectors, but, like the one I am using, they have right angles on the plugs and cause the charger to be a bit lopsided.
|
|
| OP | Post 3 made on Sunday December 7, 2008 at 11:47 |
xtrips Lurking Member |
Joined:
Posts: | February 2007
4 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
