Hi,

AS per my other post, the database doesn't have my *exact* model (42PC7RVH) but comes close with the 42PC7RH - which is pretty much identical. All the codes work and I even have some discrete codes which aren't on the OEM remote.

My inputs are :

TV (have discrete code) (inputTV)
AV1 (have discrete code) (inputVideo1)
AV2 (have discrete code) (inputVideo2)
Comp 1 (have discrete code) (inputComp1)
Comp 2 (have discrete code) (inputComp2)
RGB (have discrete code) (inputRGB/PC)
HDMI 1 (toggle) (inputHDMI)
HDMI 2 (toggle) (inputHDMI)

You'll notice the issue I'm having is with the HDMI as I don't have discrete codes for either HDMI 1 or HDMI 2. It's a toggle, so if on '1' and pressed it goes to '2' and vica versa.

Is there a way to enter *two* buttons as an input at all? If I could have it press 'inputTV' and then 'inputHDMI' all would be well because it'd end up going to HDMI1 ;)

You could set an Activity to set the input to InputTV and then include the HDMI1 as Additional Command When Activity Starts.

Note: The Activity Start/Exit macro feature becomes available when you review the activity and select "Yes, but I want to add more control of options and devices for this Activity". Just press next/save a few times until you reach the feature.