Post 1 made on Monday September 1, 2008 at 06:56 |
nemery Lurking Member |
Joined: Posts: | September 2008 1 |
|
|
Can anyone help. I just set up a watch TV activity on my Harmony One. It switched on my Foxtel IQ2 and Sony amp but really upset the TV.
The TV had been set to PC input before being switched off.(I have a media centre PC connected as well)
When the TV switched on it was locked to the PC input but only came on approx 1 second every 30 seconds. I eventually had to switch the TV off and unplug it from the wall for an hour before it would work correctly.
Don't want to try the watch TV feature again in case it locks up again.
Using the HArmony in device mode works everything OK.
|
|
Post 2 made on Monday September 1, 2008 at 07:11 |
hhatkin Long Time Member |
Joined: Posts: | February 2008 461 |
|
|
First make sure the TV is set up correctly, using method 2 for setting the inputs, and with the correct power-on delay.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.