Your Universal Remote Control Center
RemoteCentral.com
Harmony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Harmony One with 722 PVR
This thread has 6 replies. Displaying all posts.
Post 1 made on Monday August 11, 2008 at 11:12
brywisco
Lurking Member
Joined:
Posts:
August 2008
3
I am trying to setup my new H1. I am starting with the basic Watch TV activity and right off the bat I am confused. The setup wizard is asking me set the input of the PVR. What should these settings be??? I understand the TV input must be setup (in my case the TV input must be set to HDMI 2 for satellite) but what the heck is this PVR input stuff asking for?
Post 2 made on Monday August 11, 2008 at 11:19
bolzak
Long Time Member
Joined:
Posts:
August 2008
10
I am into my new Harmony 550 for about a week so I understand your confusion. If you step through the wizard, you may have an option that says "I don't need to set an input". Choose that one. When I set mine up with my 722, I added an input and called it HDMI. Everything is working fine with this setup. I don't think you'll have any problems by selecting the other option since the 722 only has one input.

Hope that helps.
OP | Post 3 made on Monday August 11, 2008 at 11:33
brywisco
Lurking Member
Joined:
Posts:
August 2008
3
The wizard for this activity asks: What input or channel does your Dish network PVR need to be on?

The choices:
SD
S-video
Source input is missing

Help!
Post 4 made on Monday August 11, 2008 at 11:36
hhatkin
Long Time Member
Joined:
Posts:
February 2008
461
This often happens and it doesn't cause a problem.
Select any of the options and as they don't do anything they will have no effect on the Activity.
Post 5 made on Monday August 11, 2008 at 11:41
bolzak
Long Time Member
Joined:
Posts:
August 2008
10
When I hit that option, I selected Source Input missing and created the HDMI source. Since there is no other source but one for the 722, I don't think it matters what choice you make, but in creating an HDMI source, mine works fine.
OP | Post 6 made on Monday August 11, 2008 at 11:48
brywisco
Lurking Member
Joined:
Posts:
August 2008
3
Thanks for such prompt replies. I am trying to set this H1 remote up at a computer far removed from my entertainment system so I can surprise my wife with it tonight. You can thus understand my confusion when the wizard is asking for an input for the PVR. The PVR only has a coax cable as an input and outputs thru HDMI in my case.

I hope you are correct that any of those option work and actually have no effect on the activity.

I look forward to setting this thing up in more detail with channel faves etc.!!!
Post 7 made on Monday August 11, 2008 at 14:55
jlet
Super Member
Joined:
Posts:
March 2004
2,631
Or use the "Device > Settings > Adjust inputs" and delete all inputs.
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse