On February 19, 2008 at 08:51, akirby said...
The Harmony should mimic whatever you have to do with
the original remote. When the harmony fails, how do you
get the OEM remote to switch to the component? You must
setup the harmony to work exactly like the OEM remote.
The Harmony is set up to mimic the original remote..except it is not working properly..hence the post to see if anyone else has an Aquos TV and has figured out the fix for this annoying issue from changing from an HDMI input to a componant input.
That is why the 880 is currently set up to use option 3 when changing Inputs. Press the Input button to bring up the menu of inputs, then press the down arrow to cycle through the inputs, then press Select (enter) to select the input. works perfectly on the OEM remote, works perfectly when going from Input 3 (componant) to Input 5 (HDMI), flat out fails when going from Input 5 (HDMI) to to Input 3 (Componant). It stops on TV, and refuses to budge off of TV when the commands are coming from the 880. I have increased the delays from 100ms up to 1200ms and beyond in 100ms steps thinking that it was just needing a pause. This is unsuccessful as well.