| Post 1 made on Friday March 9, 2007 at 11:14 |
jwhite83 Long Time Member |
Joined:
Posts: | January 2006
72 |
|
|
I just set mine up. It seems to take longer for my Harmony 676 to respond than the OEM remote . The delay time is set to 100 (which I think is the lowest permitted) and the inter device delay was set at 2000 and I lowered it to 100 Any suggestions for speeding up the response time?
|
eff1jane |
|
| Post 2 made on Friday March 9, 2007 at 14:57 |
DishDog Long Time Member |
Joined:
Posts: | February 2007
14 |
|
|
Did you setup the HR20 as a PVR using HR20-700 as the device name?
|
|
| OP | Post 3 made on Friday March 9, 2007 at 19:03 |
jwhite83 Long Time Member |
Joined:
Posts: | January 2006
72 |
|
|
Yes. If you are referring to my previous post where I could not get the Harmony to work on the HR20, I figured out the problem. When the DVD guy installed it, he told me he had set the device to IR. In fact, he set it to RF. After I changed that setting, everything worked fine (except for the slow response time mentioned above).
|
eff1jane |
|
| Post 4 made on Friday March 9, 2007 at 21:31 |
DishDog Long Time Member |
Joined:
Posts: | February 2007
14 |
|
|
Have you tried setting IK-Delay to 0?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
