Your Universal Remote Control Center
RemoteCentral.com
Harmony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Harmony 880 Pioner Inno XM
This thread has 2 replies. Displaying all posts.
Post 1 made on Thursday February 8, 2007 at 02:03
Jimman
Lurking Member
Joined:
Posts:
February 2007
3
I have set up the Harmony with my Pioneer Inno XM Radio. Everything is fine EXCEPT the remote will NOT power ON or OFF the Inno. I does turn on my Sony AV and change the input correctly buy does not turn the radio on. When I use the Pwr Toggle Soft button the radio will turn on and off but not with the ALL OFF and XM setup. Any Suggestions?
Post 2 made on Thursday February 8, 2007 at 10:05
akirby
Super Member
Joined:
Posts:
March 2004
4,640
First try increasing the inter-device delay for the XM radio device - the other device commands may be interfering with it. If that doesn't work re-run the power setup and make sure it's setup to use the Pwr Toggle command that you verified works.
OP | Post 3 made on Thursday February 8, 2007 at 15:22
Jimman
Lurking Member
Joined:
Posts:
February 2007
3
The problem was NOT with the Inter-Device Delay. All I had to do was choose the softkey Pwr Toggle instead of the default setup for power up and down and "waalaa" all is well...Thanks for steering me in the right direction


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse