Post 1 made on Monday February 5, 2007 at 17:33 |
CRUZMISL Founding Member |
Joined: Posts: | December 2001 18 |
|
|
I have an issue with one activity. My equipment on the activity is as follows,
JVC TV Dishnet DVR Outlaw processor
Essentially for this activity I only want to turn on my Outlaw. I will only use this activity from another activity where the TV and DVR are already turned on. The problem I am having is the Harmony wants to change the TV input. Since it's a toggle between digital inputs it always goes to the wrong one. Is it possible to have the TV on the activity but not change the input? If not, how do I delete the TV from the activity. It's automatically adding it during set up.
Thanks! Joe
|
|
Post 2 made on Monday February 5, 2007 at 18:09 |
akirby Super Member |
Joined: Posts: | March 2004 4,640 |
|
|
You control this by setting up your TV so it knows how to select inputs properly, then you setup the activity by specifying the input that you need on the TV.
My guess is (assuming you have the correct input selected for the TV for that activity) that you told it you have a discrete input selection but gave it the toggle command. When you enter the activity the harmony thinks the input command needed for the TV is a discrete command and resends it (just to be safe), but it's really a toggle which changes the input. If the harmony thought it was a toggle it wouldn't resend it. Adjust the input setting for the TV and that should fix it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.