Post 1 made on Monday January 29, 2007 at 03:11 |
chatman Long Time Member |
Joined: Posts: | November 2005 15 |
|
|
Hi!
I set up the activity "TV". In this process the setup asks for the tuner mode, the power state and any additional commands I want to use. However, the only command I need to send is for example "1" to turn on the TV and set it to cannel 1. With Logitechs serup routine it first turns on the TV, sets the input to "tuner" and sends the "1"-command. I found no way to bypass the first 2 steps and diretly send the "1"-command.
Any ideas?
Thx Martin
P.s.: Model is a Harmony 525 if that matters
|
|
Post 2 made on Monday January 29, 2007 at 09:18 |
akirby Super Member |
Joined: Posts: | March 2004 4,640 |
|
|
Change the power settings for the TV to discrete (different buttons for on and off), then tell it "1" is the power on button.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.