Post 1 made on Friday January 19, 2007 at 17:46 |
Hi I've tried searching for this as I'm sure it has been covered before; but no luck! I have just finished programming a Harmony X-box remote (very similar to the 525) and everything is working well except that when controlling my STB, using the directional arrow keys causes menus to shift 2 positions rather than one. I tried learning the commands from the original remote but the same thing happened. I'm sure I can adjust this somehow using speed settings, but was unsure of which settings to change. Any suggestions?
Thanks!
|
|
OP | Post 2 made on Friday January 19, 2007 at 18:11 |
Never mind. I did more searching and found out how to adjust the repeats. Turning it from 3 to 0 did the trick.
|
|
Post 3 made on Friday January 19, 2007 at 23:04 |
Kevin C S Long Time Member |
Joined: Posts: | January 2006 183 |
|
|
I have a similar problem with volume and channel keys on mine that repeat settings will not correct (even at 0). If you are really quick hitting the button, it will go one, but it is difficult to do. Kind of annoying, but I can't see anything else being able to adjust such a problem other than the repeat setting.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.