| Post 1 made on Friday January 12, 2007 at 15:52 |
club411 Lurking Member |
Joined:
Posts: | January 2007
2 |
|
|
Hello all,
There are no codes for the zone 2. I did find a posting that reccomended the integra series code for the sone 2 on and off function. That does indeed work. However volume control and inputselction does not. Does anyone have any idea how to get this to work?
Thanks!
|
|
| Post 2 made on Friday January 12, 2007 at 17:28 |
jcbremotes Long Time Member |
Joined:
Posts: | October 2006
412 |
|
|
You could learn the desired zone 2 codes. Use the original remote in the zone 2 mode (or zone 2 remote - each receiver varies) and learn to the zone 2 device in the Harmony config.
|
|
| OP | Post 3 made on Friday January 12, 2007 at 17:37 |
club411 Lurking Member |
Joined:
Posts: | January 2007
2 |
|
|
tried that...zone 2 on the remote does not work (only for power on and off) the inout changes and volume does not change ( even the manual says it should)... odd huh?
|
|
| Post 4 made on Saturday January 13, 2007 at 18:10 |
jcbremotes Long Time Member |
Joined:
Posts: | October 2006
412 |
|
|
Verify that on the original remote (if zones 1&2 use the same remote) that it is in the correct zone mode. Also, you might try learning the commands in RAW mode.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
