I have just set up an 880 with good success, but would like to be able to direct access the color and sharpness settings for a Sony LCD 32" V Series XBR. Anyone know where I can get the codes to provide the Harmony folks?

Did you check all the commands in Device mode? They may already be there. If not you need to find Pronto hex commands and send them to support and they'll add them for you.

That's exactly my problem. The device mode has contrast (picture) and brightness, but not the color and sharpness. Harmony cannot help and I do not know how to find the pronto hex commands. Can you help me here? Thanks

If the original remote has these buttons just learn them.

Otherwise check the discrete hunter forum here on remotecentral or avsforum.com .

The original remote does not have the direct command for this, but a multi step situation. I did look on remotecentral, but did not find (though I am new here). One set of codes I did find and sent to harmony, but they did not work, so now I really could use someone to lead me. Sorry I am not so good at this.

Try avsforum.com or call harmony support and see if they can find one on a similar Sony device.

thanks. Tried avsforum a couple of times, but no response. Will lean on the Harmony people a bit more.

Did you try the Remote Central Pronto Discrete section (File > Pronto > Discrete > Sony > Televisions)? Page 2 of this site ([Link: remotecentral.com]) has the hex codes for "Color +", "Color -", "Sharp +", and "Sharp -". Way back when the "Harmony IR Analysis center" tool was available, I added the ones for "Color +" and "Color -" and they worked (and still work) on my Sony KV-34XBR800 TV.

jlet,
After my last post I stumbled across these at the location you noted and beamed them to the Harmony people. We will see what happens, but in any case much obliged for your post.