I've noticed that when I use the fast forward and play features for my Explorer 8300HD, which essentially acts like a PVR, the commands to play and fast forward seem to have a delay in their actions. I've checked the delay feature for the remote, and it seems to be set to 0ms for this device. Am I missing something? Is there a way to increase the speed in which the device (8300HD) responds to commands?

Any help would be appreciated...

I checked the following:

Power on Delay = 3000ms
Inter-key Delay = 0ms
Inter-Device Delay = 1000ms

Which of the above should I adjust to solve my problem?

Have you tried reducing the number of repeats?

Where do I reduce the number of repeats?

Go through the Troubleshooting. You are looking for a complaint option something like "The Device responds too much (or too little) to some commands."

Think I found it. It gives you the option to increase or decrese the setting. I'm currently at 3. I think I'll bump it up to to 4 and give it another shot...

You need to also decrease the inter-device delay. Due to a software bug, the sum of both the inter-key and inter-device delays is invoked. I use the following values for my SA8300HD:
Power On Delay = 100 ms
Inter-key Delay = 0 ms
Inter-Device Delay = 100 ms
Number of Repeats = 3 (default)

Thanks for the info. I'll give it shot...

For faster response, you usually want to decrease the number. If you decrease it too much, the symptom is that the device starts occasionally failing to register commands.

jlet -

Thanks. Your suggestion worked great!!!

Thanks for the help!!!