Post 1 made on Thursday March 2, 2006 at 08:26 |
paranoid Long Time Member |
Joined: Posts: | March 2006 15 |
|
|
Hello everybody!
After having successfully stumbled through the ingenious configuration software in only 8 hours for 4 devices :-) there is still this issue:
My Harman AVR only switches volume in step of +/- 2dB. I have tried to teach commands from my original remote with short keypresses and have lowered all delays to zero, except for the startup-delay. I couldn't find the menu, where I could ajust the "repeater" value, which is mentioned in some threads. Maybe that is my problem?
Thanks
|
|
Post 2 made on Thursday March 2, 2006 at 08:56 |
akirby Super Member |
Joined: Posts: | March 2004 4,640 |
|
|
It's under Troubleshooting.
|
|
OP | Post 3 made on Thursday March 2, 2006 at 09:43 |
paranoid Long Time Member |
Joined: Posts: | March 2006 15 |
|
|
Thank you! It fixed my problem. If the goal had been to hide the setting as good as possible from the user, Logitech would have done well.
|
|
Post 4 made on Thursday March 2, 2006 at 09:54 |
akirby Super Member |
Joined: Posts: | March 2004 4,640 |
|
|
Yeah, I wish they'd put a direct link to change the number of repeats under Device options.
OTOH - troubleshooting would seem to be a logical place to go if you're having problems.
|
|
OP | Post 5 made on Thursday March 2, 2006 at 10:20 |
paranoid Long Time Member |
Joined: Posts: | March 2006 15 |
|
|
I've never in my live bothered with official troubleshooting guides. Most of them are too general - like "have you plugged in the AC?". I like to temper with all settings myself. I agree that it would be better to make it accessible from the device options.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.