Post 1 made on Friday February 17, 2006 at 18:29 |
mohanman Long Time Member |
Joined: Posts: | December 2005 33 |
|
|
Hi guys, I am having problems with 880 and H/K receiver (AVR-630). When switching from inputs on the reciever (e.g. dvd..video 1..video 2), it doesn't change sometimes, while other times it does.
I can't figure this out, so I read on other websites to increase the delay, which I did now to 800ms. It works better, but still skips out almost 15% of the time. For this price I want it to be perfect.
Any other advice? I also increased repeater to 4, but still no help
Thanks Mo!
|
|
Post 2 made on Friday February 17, 2006 at 18:43 |
akirby Super Member |
Joined: Posts: | March 2004 4,640 |
|
|
Which delay did you increase? Should be the inter-device delay for the receiver. Increase it until it works reliably. If that's what you set for 800 ms and it still misses try 900 or 1000. IF it only does it when powering on then increase the power-on delay instead.
|
|
Post 3 made on Wednesday December 13, 2017 at 14:40 |
fallyjonash Lurking Member |
Joined: Posts: | December 2017 2 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.