Hi,

I have the same problem with my Harmony 880 and Sony Bravia KLV-V32A10. One thing that I noticed which might be relevant to this problem is that when I add the TV device to my setup it lists the TV as being a KLV-S32A10 - the Bravia model that does not have HDMI. Is there a problem with the configuration database that is returning this incorrect TV model which does not have an HDMI input? I will call Logitech support tomorrow for an explanation. Does this model number get saved in the config for anyone else?

Try putting in a partial model number and see if it gives you multiple choices.

I hope I am not repeating obvious info, but many HDMI systems -especially receivers-that have HDMI switching, will not work properly unless the source is running- there is a handshake process in HDMI - so if you switch an HDMI input on a receiver, before it (The HDMI input # 1, or #2, etc) is being fed by a signal, it will not switch properly. Try changing the order of devices turning on to see if that helps.

Good suggestion, but I leave my STB on all the time. The Sony STB has a bug where it loses its channel skip settings if you turn it off. To avoid this I just leave it on. Gotta love all this technology that half works!

james

I just checked my settings and my Bravia was also listed as being a KLV-S32A10. I added a new TV and typed in "klvv32a10" and lo-and-behold I got a new TV of type KLV-V32A10. I was very excited as this TV had 13 pages (!) of commands instead of the original 10. But when I tried the InputHDMI command it still did nothing. So it looks like they have added the V to the database but it still doesn't work properly.

james