|
|
|
Harmony Remote Controls Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | IR not strong enough This thread has 9 replies. Displaying all posts. |
|
Post 1 made on Sunday January 19, 2003 at 16:48 |
JB NY Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
My sitting position is about 15 feet away from my equipment. I am finding that, more times than not, I end up pressing buttons on the remote (SST-768) a few times before the equipment picks up the IR signal. A few times I am actually getting up from the chair to get the remote a foot a two closer to the equipment. Anyone else having a problem with the IR transmitter not being strong enough? Is there anyway to boost the signal from the setup?
|
|
Post 2 made on Monday January 20, 2003 at 11:38 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
Fifteen feet shouldn't be a problem. If you've done a lot of programming in your original setup, you might try some fresh batteries to see if that makes a difference. Mike www.SurfRemoteControl.com
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
OP | Post 3 made on Monday January 20, 2003 at 16:36 |
JB NY Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
Already tried that, no improvement. :-(
|
|
Post 4 made on Monday January 20, 2003 at 16:59 |
www.BlueDo.com Founding Member |
Joined: Posts: | January 2002 1,724 |
|
|
Do you have fluorescent lighting? David www.BlueDo.com
|
MX-3000, MX-950, MX-900, MX-850, MRF-300, MRF-250 - Call or Email for THE BEST PRICE! [Link: BlueDo.com] or call (303) 873-1750 |
|
OP | Post 5 made on Tuesday January 21, 2003 at 17:00 |
JB NY Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
|
Post 6 made on Tuesday January 21, 2003 at 17:07 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
It's possible that one of the emitters is not working. There are two of them that are offset so that the remote will work when held in a vertical position. You might try covering each side of the window with your hand to see if it works with either side covered, as it should if both emitters are working.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 7 made on Tuesday January 21, 2003 at 18:38 |
JB NY, did you have to digitize your commands for your devices? Did you digitize raw commands? The commands the Harmony may be sending may not exactly be the right IR language for your device, or the raw commands may not have digitized properly. They may be close enough however to still work when you are close to your device. Just a thought, but if you are all out of ideas, you might want to try adding, or digitizing your commands again and see if that helps.
Ro
|
|
Post 8 made on Thursday January 30, 2003 at 03:25 |
urlybird Lurking Member |
Joined: Posts: | December 2002 6 |
|
|
My computer is on the other side of the basement from my HDTV. I frequently use the Harmony 768 from 30+ feet without any problems.
|
|
OP | Post 9 made on Thursday January 30, 2003 at 19:59 |
JB NY Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
Ok I think I have a bad IR transmitter. There are two transmitters on the remote, the on the right (the one that points down) seems to be dead. If I cover the left side, the remote doesn't work. If I cover the right side, no problem. I guess I've got to RMA it. I bought it through www.SurfRemoteControl.com so I guess I'll be calling them tomorrow. :-(
|
|
OP | Post 10 made on Wednesday February 12, 2003 at 20:53 |
JB NY Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
recieved a new remote. It was the IR transmitter, the new one works great.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|