| Post 1 made on Monday June 20, 2005 at 13:34 |
Hi I have a 659 and I just noticed that my on command for x-10 IR light control also triggers the station preset down on my pioneer vsx-35tu. result being that if i turn on the lights with the remote while the stereo is on to radio the channel goes down 1 preset. Any ideas on how to handle this one?
|
|
| Post 2 made on Monday June 20, 2005 at 16:31 |
akirby Super Member |
Joined:
Posts: | March 2004
4,640 |
|
|
You could try changing the number of repeats on one device and hope that one is more sensitive than the other, but that's a shot in the dark. You could also try a different x-10 light controller - it may use different IR commands.
|
|
| Post 3 made on Monday June 20, 2005 at 16:44 |
shorthand Advanced Member |
Joined:
Posts: | September 2004
771 |
|
|
You could add a station preset up on the reciever to the same button. Not perfect but workable.
Another possibility is if either has a setting to be reciever number 1, number 2, etc., that should fix it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
