Your Universal Remote Control Center
RemoteCentral.com
Blu-ray & DVD Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 3
Topic:
Sony DVP-CX995V anyone?
This thread has 39 replies. Displaying posts 16 through 30.
Post 16 made on Saturday December 16, 2006 at 10:47
slaperk
Lurking Member
Joined:
Posts:
December 2006
2
We purchased the Sony 400 DVD player in August 2005 and had no problems for several months.

However, in early 2006 we lost all the title information we had manually entered. Essentially, the machine “reloaded” all the discs, wiping out all the information. We reentered the information a few times and it kept doing it.

We called Sony and they suggested that our power wasn’t “clean” enough, so we purchased an expensive power conditioning unit (it cost more then the DVD player!!), retyped all the information and had the problem again. We contacted Sony for a replacement unit. We had the same problem, and the unit was replaced a second time.

With our third unit, we haven’t taken the time to reenter the information. Instead we are using printed spreadsheets to keep track of our CDs/DVDs.

Sony says they have no record of anyone else experiencing this problem. However, I see from doorpro's comments that we are not alone. I'm not aware of any built in MASS DESTRUCT sequence as doopro mentions. Has any one else had this problem? Has anyone else seen the Class Action Suit against Sony for problems with DVD players? It doesnt' include this model, but it makes you think......

In general we love all our Sony products, but this issue has been very frustrating.


slaperk


On 1136246780, doorpro said...
Hello all,

I have just bought that DVD changer I have ever had but
beware guys as there are a few anomalies with it..

Now admittedly most of the problems are just the differences
between this and past Sony machines but I found a problem
that caused me 21 hours of H.E.LL ..

So here I was, it was unboxed and installed and now I
had to start loading the thing almost to capacity I might
add (350 DVD’s) and I knew that I had to start labeling
and adding them to various categories and folders but
this was easy with the DVD cases in front of me and it
only took about 5 hours.

Now for the problem... I turned the machine on a couple
of days ago to show it off to a friend and it locked up.
So what did I do? The same thing that any other man would
do, I started pressing buttons, stop, pause, open door,
and on and on I went..

Then I turned it off and then back on again... GONE!!!
everything was gone all I had were 350 question marks
so the machine had lost its memory of all my work and
I have just spent 21 hours re-doing them all over, but
this time without the cases handy, cause lets face it
they all got tossed in a box.

So what I had to do was sit and watch the first few seconds
(sometimes minutes) of each movie to see what was what
and of course I knew about 75 percent but then there were
those movies that play for about 15 minutes before they
start to put anything on the screen, normally not bad
but in this case it was .... Well you get the Idea...

So on finishing I realized that I had just gone through
my HD Tivo finding hidden codes and switches that are
built in but the manufacturer either doesn’t want you
to know about them of perhaps they are just flukes of
programming, either way if this Sony has a MASS DISTRUCT
sequence it would have been nice of them to tell me DO
NOT touch these buttons in this order or it DELETES everything
which is what happened.

Well, that’s my story, sorry for going on but I was both
wondering if this has happened to anyone else and also
wanted to warn any unsuspecting owners of the Sony DVP-CX995V

Oh yeah, Happy New year to you all.
Doug.
Post 17 made on Saturday December 16, 2006 at 21:49
shnakz69
Active Member
Joined:
Posts:
February 2006
737
i have 3 of the these units using the DMX software for the MX-3000...works AWESOME....never have any problems either.
Post 18 made on Sunday December 24, 2006 at 16:50
WopOnTour
Lurking Member
Joined:
Posts:
February 2003
4
Deleted Duplicate Post
Post 19 made on Sunday December 24, 2006 at 16:54
WopOnTour
Lurking Member
Joined:
Posts:
February 2003
4
I have the exact same problem
I'm still not sure what triggers it but every few weeks or so the 995 looses all of the DVD title data. (replaces them ALL with "?")

I called Sony as well and they suggested a voltage spike- but I'm already using TrippLite conditioning so I called BS.
I basically got "Well that's all I can suggest happended" from the CSA
But it occurs at such a frequency that I too have given up on typing the data in and just made up an Excel Spredsheet to add the details to when we add a DVD. Stupid when it should do this for you...

Has ANYONE heard of a fix for this phenomena??
Thanks
WopOnTour

On December 16, 2006 at 10:47, slaperk said...
We purchased the Sony 400 DVD player in August 2005 and
had no problems for several months.


However, in early 2006 we lost all the title information
we had manually entered. Essentially, the machine “reloaded”
all the discs, wiping out all the information. We reentered
the information a few times and it kept doing it.


We called Sony and they suggested that our power wasn’t
“clean” enough, so we purchased an expensive power conditioning
unit (it cost more then the DVD player!!), retyped all
the information and had the problem again. We contacted
Sony for a replacement unit. We had the same problem,
and the unit was replaced a second time.


With our third unit, we haven’t taken the time to reenter
the information. Instead we are using printed spreadsheets
to keep track of our CDs/DVDs.


Sony says they have no record of anyone else experiencing
this problem. However, I see from doorpro's comments
that we are not alone. I'm not aware of any built in
MASS DESTRUCT sequence as doopro mentions. Has any one
else had this problem? Has anyone else seen the Class
Action Suit against Sony for problems with DVD players?
It doesnt' include this model, but it makes you think......


In general we love all our Sony products, but this issue
has been very frustrating.

slaperk

On 1136246780, doorpro said...
Post 20 made on Friday December 29, 2006 at 05:19
dankchief
Long Time Member
Joined:
Posts:
January 2006
48
To fix the autoplay problem all you do is push open instead of power and pick your dvd there you go!!!
Dank Chief
Post 21 made on Saturday December 30, 2006 at 11:11
JustPlainDon
Long Time Member
Joined:
Posts:
March 2006
42
Another autoplay fix (not mine but I wish I had thought of it) is to put a CD with a few minutes of silence or even a custom burned DVD in slot 1. Yes, you sacrifice a slot, but you have 399 others to fill. When you finish playing the title you want to watch and are ready to power down, load up the disc in slot 1, wait a few seconds and then power down. If you can program macros into your remote, it is all automatic:

POWER DOWN sequence:
a) go to slot 1
b) pause 2-5 seconds
c) power off


The next time you power up, a disc with silence (or even a spoken or text message if you know how to author DVDs or CDs) will begin playing.

I've found it to be a blessing to the annoying autoplay "feature".

However, I have to admit I like dankchief's solution too.

L8r,
Don
When in doubt, mumble.
Post 22 made on Friday January 5, 2007 at 23:37
HandleCranker
Lurking Member
Joined:
Posts:
January 2007
1
Hello, I just bought the CX995V and the Harmony 880. I've managed to load the "csv" file from DVD PROFILER to the Harmony, but when I select the 'media' button it shows the folders and when I select a folder it shows the DVD'S, but when I push the button for a DVD nothing happens. I have done the setup several times with various results, such as; when I push the button for a DVD; it will change chapters, or it will bring up disc explorer, or it will power off, etc. etc..
Does anyone know how I should setup the remote and what items I should change?
I have been at this for seven days now and have run out of ideas.
Post 23 made on Saturday January 6, 2007 at 01:55
wjjz106
Long Time Member
Joined:
Posts:
September 2005
268
On January 5, 2007 at 23:37, HandleCranker said...
Does anyone know how I should setup the remote and what
items I should change?
I have been at this for seven days now and have run out
of ideas.

I think you may have better luck by either posing your questions or doing a search on this forum:

[Link: remotecentral.com]
DVD 12 Step Member
[Link: invelos.com]
Post 24 made on Tuesday January 23, 2007 at 02:52
kerrylay
Lurking Member
Joined:
Posts:
January 2007
1
Just today (1-22-07) my almost one year old unit locked up, just as indicated by Doug. I shut it off and back on, only to find the same condition on the screen. My long day of typing information for some 300 + discs was GONE. Sony database showed nothing. Online chat was a complete wast of time. I will try the hotline tomorrow, but reading this thread has me afraid to enter all that stuff again. I already have a spreadsheet, but what a waste not to be able to use the thing as it was advertised. This could be a truly great machine if it worked faster, had a on-screen menu that was easier to read, did not start a disc every time you turn it on, and didn't drop all of your work down a hole. Sony needs to pay attention and do some more engineering on this thing. Kerry
Post 25 made on Friday February 2, 2007 at 19:37
Dogbert
Lurking Member
Joined:
Posts:
February 2007
1
I understand the problem you're having with the CX995V, I ran across the same problem going from the CX985V to the CX995V. i.e. In the CX985V selecting a DVD from within the Sony Explorer was as easy as typing in the DVD #. For some reason this does not work on the CX995V, which I'm guessing is a bug on Sonys part. To get around this you have to do the following:

1. DVD: Stop
2. DVD: Display
3. DVD: Enter
4. DVD: "XXX" (DVD to go to)
5. DVD: Enter
6. DVD Display

Stupid place to have to go to. Now to get your Harmony remote to do this automatically (from the Media menu you've already uploaded into it) you will need to contact Logitech support and have them code the above functions into your profile. I had them do this and now it works the way I want it to.
Post 26 made on Friday February 16, 2007 at 14:48
tjlmbklr
Long Time Member
Joined:
Posts:
July 2005
172
don't mean to thread hijack, but my question directly related to this DVDplayer (actually the CX985V)

DVD player sound; fiber optic or digital coax

--------------------------------------------------------------------------------

I have had sound issues since the day I received it. I thought at one time it was AV receiver related, am now convinced it's the DVD player. ( have had 3 receiver since) the issue I am having is every know and then I will turn my whole system on, and I will not get sound from my DVD player. I know that it is the fault because I get no light in the fiber optic cable when I unplug it from the receiver. I have an extended warranty on this player and called for service. They told me they send a empty box and I would have to send the unit out for repair. With about 200 disc already in specific slots (macroed remote) I wasn't about to take them all out to send the DVD player to be fixed. And somehow I think it would come back still with the issue, only because I bought it from Sony refurbished. The issue isn't all the time and the sound will eventually come on, so for now I will have to live with it.

So my long winded question is, how would digital coax compare for sound? I ask because hopefully the issue is only through fiber optic.

If the fiber optic is my best bet then I might as well ask; how good it the HDMI up-scaling model of this same player DVP-CX995V? I have a upscaling Pioneer Elite VSX 82TSX and I wonder if this does a better job of scaling my DVDs as is.

TJ
I love technology! I just need to figure out how to use it. Keeping up with it's growing rate is hard enough!
Post 27 made on Friday February 16, 2007 at 15:15
smokinghot
Super Member
Joined:
Posts:
August 2006
3,688
Hey Tj,

You would never be able to hear any difference, if you switched to digital coax.

Your second question relating to PQ I cannot answer. LOL... I had the opprotunity to audition one of the 995's the other day and it wouldn't read a single DVD. This was used of course but none the less, not too impressive.

I would be surprised if the 995's scaling would be better than the elite 82. But then again I haven't read anything negative about the Sony's capabilities in that area. I guess the one plus would be not having the additional equipment (receiver) in line. DVD player to display, rather than DVD to Reciever to Display.

If you do end up with one, post how the PQ compares to the elite's abilities. I would like to know.

Best of Luck...!
....Light travels faster than sound. That's why some people appear bright until you hear them speak.
Post 28 made on Friday February 16, 2007 at 17:36
tjlmbklr
Long Time Member
Joined:
Posts:
July 2005
172
On February 16, 2007 at 15:15, smokinghot said...
Hey Tj,

You would never be able to hear any difference, if you
switched to digital coax.

Your second question relating to PQ I cannot answer.
LOL... I had the opprotunity to audition one of the 995's
the other day and it wouldn't read a single DVD. This
was used of course but none the less, not too impressive.

I would be surprised if the 995's scaling would be better
than the elite 82. But then again I haven't read anything
negative about the Sony's capabilities in that area.
I guess the one plus would be not having the additional
equipment (receiver) in line. DVD player to display,
rather than DVD to Reciever to Display.

If you do end up with one, post how the PQ compares to
the elite's abilities. I would like to know.

Best of Luck...!

Will do, thanks a lot!
I love technology! I just need to figure out how to use it. Keeping up with it's growing rate is hard enough!
Post 29 made on Tuesday February 27, 2007 at 16:13
psteven
Long Time Member
Joined:
Posts:
February 2007
10
On December 16, 2006 at 21:49, shnakz69 said...
i have 3 of the these units using the DMX software for
the MX-3000...works AWESOME....never have any problems
either.



I just got a Pioneer CX995V... and recently picked up an MX-3000. Haven't finished programming the MX-3000 yet, but wanted to use it select video from Pioneer.
Do you have any advise or experience with this?
Post 30 made on Tuesday February 27, 2007 at 16:17
psteven
Long Time Member
Joined:
Posts:
February 2007
10
On December 16, 2006 at 21:49, shnakz69 said...
i have 3 of the these units using the DMX software for
the MX-3000...works AWESOME....never have any problems
either.

I just got the Pioneer CX995V and a MX-3000. Haven't finished programming
the MX yet, but wanted to use it to select video "thumbnails" from the Pioneer.
Also, I have entered all my DVDs in DMX software... anyway to use that info to
program the Pioneer or the MX-3000?
Page 2 of 3


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse