Your Universal Remote Control Center
RemoteCentral.com
Blu-ray & DVD Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Pioneer DV-F727 region -free modding
This thread has 4 replies. Displaying all posts.
Post 1 made on Friday July 9, 2004 at 14:29
bish ashleigh
Lurking Member
Joined:
Posts:
July 2004
3
I am hoping to get an unmodded Pioneer DV-F727 from the US and have it modded over here in the UK. Has anyone on this list done the same ... and do you know if there are any problems associated with converting a region 1 unit to play region 2 discs? Techtronics say that if this machine has not got a PAL chip, it will only play back region 2 discs in blacka and white. Most US retaillers of modded players day that the modded 727 will only play NTSC discs on an NTSC system and PAL discs on a PAL system. I am confused ...
Post 2 made on Monday July 12, 2004 at 14:59
Spiky
Founding Member
Joined:
Posts:
May 2001
2,288
It appears this player does not have a conversion circuit, so it cannot play NTSC discs on a PAL-only TV. I know PAL TVs can at least see NTSC signals, but they may be correct that it only comes through in black and white. I seem to recall some problem, but I'm in the USA and have never dealt with it. These retailers do mod it for regions, though. Does it have to be this player? Megachangers are not often the best choice for an all-around player.

Perhaps there is a European version, might even have a different number. Sometimes the European version has the conversion circuit when the USA version doesn't. But I couldn't say for this particular model.
Post 3 made on Wednesday July 14, 2004 at 03:06
cgroth
Founding Member
Joined:
Posts:
April 2002
464
I have two Pioneer 727s (daisychained) modified to play all regions, and you are right, the output is NTSC only. So you either need a TV (or other display device) that can show NTSC properly or you can buy stand alone converters. I bought one on the net (can't remember where) for $29 dollars and that works fine.
Post 4 made on Thursday January 20, 2005 at 13:58
btotanes
Lurking Member
Joined:
Posts:
January 2005
1
I'm looking for a firmware update for this model (DV-F727). I have two of these I bought in 2001 that doesn't do a good job playing DVD-R/+R discs. Can anyone point me to the right direction? I've tried contacting Pioneer. They refered me to a local 'service provider' who didn't even know what I was talking about until I explained it to him. He then told me they cannot do anything until he gets permission from Pioneer. So, the classic run-around. I'm hoping someone out there has the firmware file he can just send me (I'm also hoping the units can be updated via the disc loader).

Thanks,

Ben
Post 5 made on Monday March 13, 2017 at 21:30
Ken Maytom
Junior Member
Joined:
Posts:
March 2017
1
I have a Pioneer DV-F727 which does not play all regions
I researched this issue before i purchased the unit
- plays all regions
- easy to change region on remote
can you please advise how you got yours to play all regions

Thanks
Ken


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse