|
|
|
Discrete Code Hunter Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Discretes Needed for Samsung DVD-V1000...
| |
|
Topic: | Discretes Needed for Samsung DVD-V1000 DVD / VCR This thread has 4 replies. Displaying all posts. |
|
Post 1 made on Monday March 17, 2003 at 13:38 |
As the subject states I need the discretes for this unit. I have a TC1000 but I am confident that I can convert them from any format (ccf or hex).
-Schu
|
|
Post 2 made on Monday March 17, 2003 at 14:33 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
I've seen a few requests recently for discretes for Samsung DVD's. I haven't seen any positive reponses.
I've decoded CML and CCF data for a few Samsung DVD's and they use the same protocol and device number as typical Samsung VCR's. (As labeled by my new decoder, "(NECx2):5.5" ).
You could try all 256 commands with that protocol and see if you can find the discretes yourself. If you like, I can make a .IRP file for my MakeHex program or for Barry Gordon's GenIrdb program to generate the 256 signals (It's just a tiny change from the NEC2 .irp file). (I don't have a Pronto myself and don't know the mechanics of getting the 256 signals into the Pronto to test by IrPanels or some other method less tedious than pasting 256 times into ProntEdit).
You also might want to consider whether it's safe or whether there is risk of giving the DVD a command you can't undo. I don't know enough about DVD's to offer an opinion.
|
|
Post 3 made on Monday March 17, 2003 at 14:46 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
Schu,
I don't believe that anyone has ever found a discrete code for any Samsung DVD (or VCR or TV/Display...). The only discrete commands for any Samsung gear that I have ever heard of are discrete power commands for the SIRT-160 DSS STB for DirecTV.
I have suggested the work around of the Play command from Off that turns many DVD's/ CD's and VCR's On. (On=Play/Stop and Off=Play/Power Toggle).
One reply here reported even that doesn't work but the tray open command does.
If you don't know how to do it, post a hex command here for the power toggle, I can decode it and either generate all 256 possible commands or tell you how to do so with John Fine's MakeHex. Unfortunately, I am pessimistic that you will find one.
-Jon
|
|
OP | Post 4 made on Monday March 17, 2003 at 15:36 |
Thanks guys. I am not sure exactly what it is I am looking for. There is one button on my client's remote that he uses quite frequently. Its an input button to change input on the DVD/VCR unit. When we used the learning feature on the TC1000 it did learn but did not do anything when pressed. I am not sure if the other Samsung DVD and VCR have this same button. John Fine - if you could send me the .irp maybe I could play around with it a bit. That would be great. [email protected]-Schu
|
|
Post 5 made on Monday March 17, 2003 at 15:52 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
I'll post the irp here in case I make a mistake and Jon spots it. I email a copy also:
Device=5 Function=0..255 Protocol=NECx2 Frequency=38000 Time Base=564 One=1,-3 Zero=1,-1 Prefix=8,-8 Suffix=1,-78 Form=;*,D:8,D:8,F:8,~F:8,_
Do you have a CCF file or pronto hex for that learned key that didn't work? If it is a bad learn but almost good, Jon or I could tell what function it almost is and how to make a clean one.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|