Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need a code for select/ok button on universal charter remote for pioneer tv
This thread has 1 response. Displaying all posts.
Post 1 made on Saturday January 4, 2020 at 04:41
masterjester115
Junior Member
Joined:
Posts:
January 2020
1
As the title says, just linked up my universal charter remote to my 55 inch pioneer television, yet the okay/select button does not work. I tried playing around with it by googling different codes and canít find anything, it isnít locked to the cable setting just doesnít do anything when I press play. So I think I need a code that will fix this with instructions. Sorry, Iím a noob. Thanks in advanced.
Post 2 made on Saturday January 4, 2020 at 22:46
edmund
Elite Member
Joined:
Posts:
April 2002
13,680
You should post the code you're using the charter remote, is it 10166?

Then try 00250, 00123, or 00063

To map to a key:

1. press and hold set for two blinks
2. enter 9 9 4
3. tap set for one blink
4. enter either 00250,or 00123, or 00063
5. press OK

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse