Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
RC5 hex codes for MYTEK BROOKLYN DAC
This thread has no replies.
Post 1 made on Saturday February 9, 2019 at 08:58
przemnet
Junior Member
Joined:
Posts:
February 2019
1
Hello,

MYTEK Brooklyn DAC supports the following RC5 odes:

Rc5Command_Standby = 12,
Rc5Command_Mute = 13,
Rc5Command_Menu = 82,
Rc5Command_VolUp = 16,
Rc5Command_VolDown = 17,
Rc5Command_ProgramUp = 32,
Rc5Command_ProgramDown = 33,
Rc5Command_ActuatorUp = 80,
Rc5Command_ActuatorDown = 81,

According to manual, the device should automatically find the remote address of the remote:
4. Press any button on the RC5 compatible remote. The Brooklyn DAC find the address automatically
5. Done! - the remote is paired


I'm using irplus application on my smartphone and it actually works, when I press the button, the device finds automatically the remote addrress.

I have found so far the following hex codes that are working:

// remote addr 5
STANDBY 0000 0073 0000 000A 0020 0020 0040 0020 0020 0020 0020 0040 0040 0040 0040 0020 0020 0040 0020 0020 0040 0020 0020 0CC8
PROGRAM+ 0000 0073 0000 000B 0020 0020 0040 0020 0020 0020 0020 0040 0040 0040 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0CC8
PROGRAM-0000 0073 0000 000B 0020 0020 0040 0020 0020 0020 0020 0040 0040 0040 0020 0020 0040 0020 0020 0020 0020 0020 0020 0040 0020 0CA8

// remote addr 17
STANDBY 0000 0073 0000 000A 0020 0020 0040 0040 0040 0020 0020 0020 0020 0040 0040 0020 0020 0040 0020 0020 0040 0020 0020 0CC8

// remote addr 16
VOLUME+ 0000 0073 0000 000B 0020 0020 0040 0040 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0040 0020 0020 0020 0020 0020 0020 0CC8
VOLUME- 0000 0073 0000 000B 0020 0020 0040 0040 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0040 0020 0020 0020 0020 0040 0020 0CA8

// remote addr 20
PROGRAM+ 0000 0073 0000 000A 0020 0020 0040 0040 0040 0040 0040 0020 0020 0040 0040 0020 0020 0020 0020 0020 0020 0020 0020 0CC8
PROGRAM- 0000 0073 0000 000A 0020 0020 0040 0040 0040 0040 0040 0020 0020 0040 0040 0020 0020 0020 0020 0020 0020 0040 0020 0CA8


However, I am facing two issues:

1/ When device is turned off, when I press STANDBY button, the device turns on nicely. Unfortunately, when I push the STANDBY button to turn off the device, it does not react. I'm able to turn off the device only when I hit the STANDBY button very very fast. Sometimes it reacts after 2, sometimes after 5 very quick button presses.

For me looks like some problem with the timing of the remote / codes. Is it possible to somehow tweak it? What should I change in HEX code of STANDBY buttons?

The same situation happens when I press STANDBY button after programing the DAC for remote addr 5 and 17.


2/ What are the other supported IR codes for given Remote Addr ? If I have below codes for Remote Addr 5:
// remote addr 5
STANDBY
PROGRAM+
PROGRAM-

Can you help with getting hex codes for other supported functions like MUTE, MENU, VOLUME+, VOLUME-, ACTUATOR+, ACTUATOR- ?


Thanks in advance and Best Regards,
Przemek

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse