Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Infocus IN82 Pronto Hex Codes
This thread has 3 replies. Displaying all posts.
Post 1 made on Tuesday April 18, 2017 at 22:09
Jantzen333
New Member
Joined:
Posts:
April 2017
2
Hi Everyone,

I'm using iRule to create a custom remote for a friends home theater. They've got a Infocus IN82 hooked up but iRule only has some basic IR commands in their database. The theater has an anamorphic lens setup so I need a discrete code for both the 16:9 format and the letterbox format for this projector. I was able to find a list of IR codes on Infocus' site, but it's in NEC format and iRule only takes Pronto Hex. I've been searching around for a converter, but haven't had much luck. Anyone able to help out here. I'd really appreciate it!

Infocus IR codes - [Link: infocus.com]

Thanks,
J
J
Post 2 made on Wednesday April 19, 2017 at 00:22
3FG
Select Member
Joined:
Posts:
August 2009
1,856
Get IrScrutinizer.  On the Generate tab, select NEC1, enter 135 into the D field , 78 into the S field, and e.g. 0x02 for Menu.

16:9 Resize 0x3C
0000 006C 0022 0002 015B 00AD 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 05F7 015B 0057 0016 0E6C

Letterbox Resize 0x3E
0000 006C 0022 0002 015B 00AD 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 05F7 015B 0057 0016 0E6C
OP | Post 3 made on Wednesday April 19, 2017 at 20:58
Jantzen333
New Member
Joined:
Posts:
April 2017
2
Thanks for the response. I'll have to test out these codes next time I can make it over to their home.

Out of curiosity, how did you know to enter 135 in the the "D" and 78 into the "S" field? I assume these the device and sub device number or something similar. I've seen these being required when using a lot of the IR tools. However, I have no idea where I would have found that info.
J
Post 4 made on Wednesday April 19, 2017 at 21:52
mdavej
Active Member
Joined:
Posts:
December 2002
579
Customer code 0x4E87 is Subdevice and Device in hexadecimal (base 16) format. 4E hex = 78 decimal, 87 hex = 135 decimal. Use window calculator in programmer mode to convert.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse