Hello! I'm looking to identify the codes that LG TVs use to switch directly to HDMI 1 and HDMI 2.

I was sent a manual from LG that only lists the input button for selection, but what I need to have is for the button press to go directly to the HDMI 1 or HDMI 2 channels with 2 separate buttons.

From this site- [Link: irdb.tk] - I select LG, the 2nd from the bottom gives me a variety of code choices- it looks like I'm able to single out the HDMI 1 and 2 but I'm not completely sure if this is the correct method.

Anyone able to assist by chance?

HDMI 1

0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94

HDMI 2

0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94

Thank you very much!

I noticed the carrier frequency in your HEX is higher than any of the LG television codes I have which I think are all 006C. Any chance you have power on, power off and power toggle at the same carrier freq.? Or, would you mind sharing the full set if you have it?

The difference between 006D = 38028 Hz and 006C = 38380 is not significant.

BTW, the shown codes are somewhat "dirty", containing both "0015" and "0016".