Post 1 made on Friday January 17, 2003 at 21:06 |
geraldb Long Time Member |
Joined: Posts: | June 2002 412 |
|
|
I have tried the old codes on this unit with no success. Does anyone have any ideas?
Thank you
|
|
Post 2 made on Saturday January 18, 2003 at 09:18 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
I found the exact file for your TV, and decoded it with ccf2efc. It uses Device=3 the same as most JVC TV's. The commands posted in the discrete section for JVC TV's are also Device=3, commands 29=On and 26=Off. These are the standard discrete power commands throughout the JVC line. (other types of equipment just use different device codes).
So, I would say either you did something wrong in putting those commands in your Pronto or that particular model does not respond to discrete power commands.
-Jon
|
|
OP | Post 3 made on Monday January 20, 2003 at 11:49 |
geraldb Long Time Member |
Joined: Posts: | June 2002 412 |
|
|
Thanks Jon, I'll Try again. Last time I checked I did have 2 of the 3 tv's working.
Jerry
|
|
OP | Post 4 made on Tuesday January 21, 2003 at 23:39 |
geraldb Long Time Member |
Joined: Posts: | June 2002 412 |
|
|
No luck Jon, Anyone else have this problem?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.