Post 1 made on Wednesday August 19, 2015 at 11:11 |
Hello What are the program needed to transform NEC code to HEX ? I have this NEC standard ID code 48B7 I have a list of command 5b, 4d, 5d etc...
If you give me the name of the programs need i will work myself on it.
Thank's
|
|
Post 2 made on Wednesday August 19, 2015 at 21:56 |
3FG Select Member |
Joined: Posts: | August 2009 1,861 |
|
|
IrScrutinizer. You can enter hexadeciomal format numbers by prepending "0x". So the command 5b can be entered as 0x5b. The device number will probably be 0x48 or perhaps 0x12 (48 with the bits written in reverse order).
|
|
OP | Post 3 made on Friday August 21, 2015 at 04:20 |
Hello
Thank's 1000 times for answer I have download the program I have a window for selecting NEC protocol and lot's of NEC options I have D/S /F Where i fill out my code ? What i know it's NEC Standard ID code =48 B7 Codes are : 5b 4d 49 51 55 52 5d 59 OF 17 1F
I've read the manuel :-) Generate pane and i dont understand...
Sorry
|
|
Post 4 made on Friday August 21, 2015 at 08:32 |
Barf Long Time Member |
Joined: Posts: | August 2013 350 |
|
|
|
OP | Post 5 made on Tuesday September 8, 2015 at 09:40 |
Ok thank's... I'will go for it I also found this [Link: hifi-remote.com]Much more easy to use :-)
|
|
Post 6 made on Tuesday September 8, 2015 at 17:04 |
mdavej Active Member |
Joined: Posts: | December 2002 627 |
|
|
I don't think that's what you want. You'll end up with Yamaha signals. Those are different than NEC. That tool also only does one code at a time. But if you don't care, and your device doesn't care, then I guess it doesn't matter.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.