Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Sharp 70" LC70UD27U
This thread has 6 replies. Displaying all posts.
Post 1 made on Friday April 24, 2015 at 00:14
Bart's Custom A/V
Lurking Member
Joined:
Posts:
December 2010
6
Can Only get Power toggle to work.

Appreciate any help on this.

Thanks,

Bart
Post 2 made on Friday April 24, 2015 at 15:33
SysIntegration
Advanced Member
Joined:
Posts:
December 2013
895
you tried these?

[Link: remotecentral.com]
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110
OP | Post 3 made on Saturday April 25, 2015 at 00:54
Bart's Custom A/V
Lurking Member
Joined:
Posts:
December 2010
6
I did and every other code in ID. Maybe I'll try URC's Database next.
Post 4 made on Saturday April 25, 2015 at 18:29
SysIntegration
Advanced Member
Joined:
Posts:
December 2013
895
On April 25, 2015 at 00:54, Bart's Custom A/V said...
I did and every other code in ID. Maybe I'll try URC's Database next.

Is that sharp's 2015 4k?  The codes I posted all worked for the 2014 sharp 4k.

Is that a low end 4k or high end?  Sharp is notorious for dropping features from lower end TVs (like discrete codes).

What is the model number on the OEM remote?

Do the codes I posted work at all?  For instance, do the input codes work?  Does the power toggle code I posted work?  I'll assume the volume commands work, but also assume that if you are programming a universal with a 4k TV, you likely have a surround system and don't use volume on the TV.
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110
OP | Post 5 made on Monday April 27, 2015 at 01:24
Bart's Custom A/V
Lurking Member
Joined:
Posts:
December 2010
6
Thank You for replying !!

The remote model appears to be SHARP GB118WJSA.

The Display came from Avad ... not Costco.

Also just received a usb update from Samsung to roll back the Samsung Codes. The new Samsung codes have changed. I know better to roll out new models to a job site. Manufactures just don't get it !!

Sorry .... I only tried the Power On, Power Off Commands

Will try them all and report back

Thanks again
OP | Post 6 made on Thursday May 7, 2015 at 10:07
Bart's Custom A/V
Lurking Member
Joined:
Posts:
December 2010
6
Turned out I switched the null modem and its all good. The codeset in RTI labelled Sharp LED worked fine on the new model. Will test these next time on site
Post 7 made on Thursday May 14, 2015 at 10:29
SysIntegration
Advanced Member
Joined:
Posts:
December 2013
895
On May 7, 2015 at 10:07, Bart's Custom A/V said...
Turned out I switched the null modem and its all good. The codeset in RTI labelled Sharp LED worked fine on the new model. Will test these next time on site

You are using RS232?  Sharp's nearly always work with it.
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse