Looking for repeating codes for the cursor block.

For instance, the UP code for my VP50 Pro is:

0000 006C 0024 0000 0156 00AA 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 06C0 0156 0055 0016 00AA

Can this be made "repeating" (keep-on-pressing) ?

PS
All DVDO scalers use the same codes, except the Edge (Green).

Since you are using a Pronto Pro, as you ask a similar question in the PP section.

Open PEP (I'm on PEP3, so IDK what you are using and if the process is the same.)

Open your file--->
My Database--->
The device in question--->
Components Function--->
IR code in question and copy it--->
Save the copy and rename it repeating--->
Open the "repeating IR"--->
Click on Duration (lower right) and select the "Minimum"--->
Adjust as needed.

The reason why I say to copy and save it, is because you may still want to use the "up arrow" for normal functions. Where as you'll use the new repeating IR code for the specific button(s) you want.

KOT

0000 006C 0024 0000 0156 00AA 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 06C0 0156 0055 0016 00AA

The part shaded in blue is the NEC1 "ditto" which is what causes repeats, provided the ditto IR signal is repeated.

The number in yellow is the number of following burst pairs which should be sent once at the beginning, and the number in green is the number to be sent as long as you hold the button down.  Since the number in green is zero, the signal doesn't repeat.  Change it to:

0000 006C 0022 0002 0156 00AA 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 06C0 0156 0055 0016 00AA
 

Sorry 3FG, but the UP code still does not repeat.