| Post 1 made on Tuesday March 4, 2014 at 14:37 |
I lost the remote for my cheap HDMI switch, but it otherwise works well. Does anyone have these codes? How else could I get them? Here is a link to the product: [Link: meritline.com]
|
|
| Post 2 made on Tuesday March 4, 2014 at 14:49 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
|
| OP | Post 3 made on Tuesday March 4, 2014 at 16:45 |
I did see that thread and tried the codes with my usb-uirt (with EventGhost) and it does not change the input. :( Perhaps the IR receiver is dead?
Thank you!
|
|
| OP | Post 4 made on Tuesday March 4, 2014 at 16:55 |
As you can see, I am new to this. Most of my codes that work look like 0000 006C 0022 0002 0156 00AC 0015 0015 0015 0040 0015 0015 0015 900A 006D 0000 0001 807F 02FD
These short codes don't seem to work. I tried to find a converter but it does not accept 00186
What am I missing?
|
|
| Post 5 made on Tuesday March 4, 2014 at 18:07 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
The codes in the link are just for UEI made remotes like One-For-All, once you have the right device code, in this case Audio 1561, you enter each code one at a time and map them to key on the UEI like so:
1. aud
2. press and hold SET(setup) for two blinks, release
3. enter 9 9 4
4. tap Set(setup) for one blink
5. enter 5 digit code
6. pick a key.
My response is not stopping others from posting hex codes if they have it. Which I do not.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
