Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 4 of 4
Topic:
Xbox One
This thread has 50 replies. Displaying posts 46 through 51.
Post 46 made on Monday June 22, 2015 at 21:00
imtrbl
Junior Member
Joined:
Posts:
June 2015
1
Does anyone have the current hex codes for A, B, X, Y? The codes listed above are non-fucntional. I believe they've done an update and changed the codes...

Thanx
Post 47 made on Friday October 23, 2015 at 10:57
the4anoni
Junior Member
Joined:
Posts:
August 2015
4
I've got on and off ir commands
On:
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94
Off:
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94
I can't test it because i don't have x1 ,but i want to buy it :)
Post 48 made on Sunday September 10, 2017 at 16:42
lewisp
Junior Member
Joined:
Posts:
September 2017
1
i know this is an old thread but wanted to see if these are still working? i'm using a Broadlink RM mini and not having any luck with any of the codes listed. I'm converting to base 64 but unless i reverse the output, the Broadlink doesnt even send the packet. When i do reverse the output it does send the packet, but then there is no response from the xbox.
Any help would be greatly appreciated!
Post 49 made on Sunday March 4, 2018 at 20:51
apsulli
Junior Member
Joined:
Posts:
March 2018
1
I finally figured out how to get the XBox controlled by the Broadlink RM Mini and ultimately with Alexa.

This video from Paul Hibbert was a huge help:

Basically, I used someone else's cloud remote to learn the code in RM Bridge. In the Broadlink e-Control app, search for Xbox then select the 'Microsoft' one (the video explains this around 6min). If you just want to control the xbox via Broadlink with the app, you can stop there. If you want to activate it with voice through IFTTT, though, then you need to learn the code in RM Bridge by sending it to the RM Mini while the RM bridge is in learning mode. I couldn't find this anywhere else online so I hope it helps.
Post 50 made on Sunday February 3, 2019 at 11:05
steveye1
New Member
Joined:
Posts:
February 2019
1
Does anyone here have any experience with the arduino IR library? I'm trying to send the xbox on/off command, NEC1 (128.216.100) but i can't seem to translate that to a message for the library.

This is the function, what goes in the place of 0x0000000?

irsend.sendNEC(0x0000000, 32);

I've also tried translating hex codes posted in this thread on this website and sending the raw data, still nothing.

[Link: irdb.tk]

any help would be greatly appreciated.
Post 51 made on Sunday February 3, 2019 at 13:33
Barf
Long Time Member
Joined:
Posts:
August 2013
200
On February 3, 2019 at 11:05, steveye1 said...
Does anyone here have any experience with the arduino IR library?

Yes. It sucks.

I'm trying to send the xbox on/off command, NEC1 (128.216.100) but i can't seem to translate that to a message for the library.

This is the function, what goes in the place of 0x0000000?

"Simple": This is a four byte number. The first byte is the device parameter, with the bits reversed, here 0x01. Second is the subdevice number bit reversed, here 0x27. Third is the function parameter, bit reversed, here 0x38. Fourth is the one-complement of the third, here 0xD9. Together 0x012738D9.

I recommend that you instead try the Arduino library "Infrared4Arduino", available in the Arduino library manager with the name "Infrared". See its example "Nec1Renderer", which does sort-of what you want.
Find in this thread:
Page 4 of 4


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse