Atlona PA-100 mini amp for behind TV, etc. it's a nice solution piece, but for some reason I can't get these codes to work using a URC MX-880 and MRF-260. No apparent response.

Line Volume Up

0000 006d 0022 0002 0155 00aa 0015 0015 0016 0015 0015 0016 0015 0015 0016 0014 0015 0016 0014 0041 0015 0016 0015 0040 0015 003f 0016 0040 0015 0040 0015 0040 0016 003f 0015 0040 0015 0040 0016 003f 0016 003f 0015 0016 0015 0040 0015 0040 0016 0014 0016 0015 0015 0015 0016 0015 0015 0016 0015 0040 0015 0015 0016 0014 0016 0040 0015 0040 0015 0040 0016 05ba 0155 0055 0015 0e34

Line Volume Down

0000 006d 0022 0002 0155 00aa 0015 0015 0016 0015 0015 0016 0015 0015 0016 0015 0015 0015 0014 0041 0015 0016 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0016 003f 0015 0040 0016 003f 0016 0015 0015 0040 0015 0015 0015 0040 0015 0041 0015 0015 0015 0040 0015 0015 0016 0040 0015 0015 0015 0041 0015 0015 0014 0016 0015 0040 0016 0015 0015 0040 0016 05ba 0155 0055 0016 0e33

Mute Line

0000 006d 0022 0002 0156 00a9 0016 0015 0015 0016 0015 0015 0016 0015 0015 0016 0015 0015 0015 0040 0015 0015 0016 0040 0015 0040 0015 003f 0016 0040 0015 0040 0015 0040 0016 003f 0015 0040 0015 0016 0015 0015 0016 003f 0015 0015 0016 0015 0015 0016 0015 0040 0015 0016 0015 003f 0015 0040 0016 0015 0015 0040 0016 003f 0015 0040 0015 0016 0014 0041 0015 05ba 0156 0055 0015 0e33

Input 1

0000 006d 0022 0002 0155 00a9 0017 0014 0016 0015 0016 0014 0016 0015 0016 0014 0016 0014 0017 003f 0016 0014 0017 003e 0017 003e 0016 003f 0017 003f 0016 003f 0015 003f 0017 003f 0016 003f 0016 0014 0016 0014 0017 003f 0016 0014 0017 0014 0016 0015 0016 0014 0017 0014 0015 003f 0017 003f 0016 0014 0017 003e 0016 003f 0016 0040 0017 003e 0016 003e 0016 05bb 0155 0055 0014 0e35

Appreciate your advice.

Tom,
do you have other codes that work?

It might be worth delving back into the ccf world, analyzing these commands and any working ones to see if there's a consistent mislearn somewhere. Just guessing, really.

Did you get it figured out Tom?

If not, this is a clean generated code for one of the codes above, Volume Up I think,
give it a try.

0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94

Did anyone get any of the codes to work. I'm installing a PA100 G2 with an RTI remote. Can't get it to respond to any of the codes (including the ones Atlona Tech Support has)

You have an MRF-260 buried behind a TV?  These devices were junk.  They are so susceptible to RF interference, we stopped using them as a company.

Have you tried taking out the middle man and firing the codes directly from the 880?

Never got codes to work.

Have a PA100 new in box for $50!

Have dozens of MRF260s in the field and are very reliable for me.

Try direct IR to test the codes as was stated above. We stopped using MRF-260 also. Had numerous systems where some device codes would work and other devices like cable boxes where I knew the codes were good but wouldnt work with the MRF-260.