Hello all,
I'm hoping someone here can put me out of my misery and help me get some Altech 1131s working again.
I had ir for these at one time, but a recent firmware upgrade broke all my codes.
The IR information I have for these receivers are:
XMP-1
ID S2059
(reg: 17479)
the function codes are given in:
[Link: mydstv.org]Scouring the forums, I found an old thread detailing an IRP file. Only 4 or 5 of these codes worked from this file.
Not sure where to turn on this. I understand pronto codes, but XMP is a whole other ball of wax. Having to work on this remotely doesn't help much.
Here is the contents of the IRP file I used:
-----------------------------------------------------------------------------
Device=71.17
Function=0..512
Define A=S:4:4
Define B=3908
Define G=0
Define H=8
Define J=S
Frequency=38000
First Bit=MSB
0=210,-760
1=210,-896
2=210,-1032
3=210,-1168
4=210,-1304
5=210,-1440
6=210,-1576
7=210,-1712
8=210,-1848
9=210,-1984
10=210,-2120
11=210,-2256
12=210,-2392
13=210,-2528
14=210,-2664
15=210,-2800
Define C=0-A-S-B-(B:4:4)-(B:4:8)-D-(D:4:4)
Define X=0-A-G-J-F-(F:4:4)-(F:4:8)-(F:4:12)
Define Y=X+G-H
Form=A:4,C:4,S:4,B:12,D:8,210,-13800,A:4,X:4,G:4,J:4,F:8,F:8:8,210,-80400;A:4,C:4,S:4,B:12,D:8,210,-13800,A:4,Y:4,H:4,J:4,F:8,F:8:8,210,-80400
------------------------------------------------------------
Any help would be appreciated greatly