Post 1 made on Tuesday January 17, 2012 at 03:13 |
MusicLoverII Lurking Member |
Joined: Posts: | January 2012 2 |
|
|
Newbie question here. I would like to convert the following IR codes to HEX for use with a URC MX-890. I think MakeHEX only converts specific RC5 designated commands (could be wrong) and the ones I want do not have an RC5 designation, as far as I can tell, in the Arcam IR codes manual.
Use Analogue Audio for current source: 0x21 0x01 0x0B 0x01 0x00 0x0D
Use Digital Audio for current source: 0x21 0x01 0x0B 0x01 0x01 0x0D
Use HDMI Audio for current source: 0x21 0x01 0x0B 0x01 0x02 0x0D
Can someone please point me to the correct conversion program?
|
|
Post 2 made on Tuesday January 17, 2012 at 03:53 |
makitamark Advanced Member |
Joined: Posts: | April 2004 984 |
|
|
Those codes are RS232 code strings. According to the manual they do not exist as IR codes, only as RS232.
|
|
OP | Post 3 made on Tuesday January 17, 2012 at 15:55 |
MusicLoverII Lurking Member |
Joined: Posts: | January 2012 2 |
|
|
Now that makes more sense - I didn't understand that those were RS-232 codes in the manual. So I just looked in the Arcam Menu of my MSC-400 and low and behold those RS-232 functions are already programmed...now if I can just get the Arcam AVR-600 to play nice with those codes...
Thank you!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.