| Post 1 made on Sunday December 18, 2011 at 02:49 |
Damir Lurking Member |
Joined:
Posts: | December 2011
2 |
|
|
Good day,
I need device number and commands to perform direct input switch (hdmi1, hdmi2, etc)
I contacted Sony support team: they could not help me.
If you couldn't find codes for my tv, I'll be happy to get corresponding codes for any other Sony TV.
My sony's remote has button 'INPUT SELECT', and has no buttons to switch input directly. So I couldn't learn codes.
My universal remote device sends commands from PC using RS232. It works well with Sony protocols. I don't know how to find device/command parameters.
I tried brut force, but there are a lot of different combinations and there are no any back information from tv, expect TV's green LED.
My TV characteristics: LED, 3D, LAN support, etc.
PLEASE HELP!!!!!!
|
|
| OP | Post 2 made on Sunday December 18, 2011 at 03:51 |
Damir Lurking Member |
Joined:
Posts: | December 2011
2 |
|
|
Device codes and commands from your Sony library didn't worked with my tv
For example, there were no result after sending command 90 to device 26.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
