Bit of a blast from the past in terms of the kit, I am aware, but has anyone ever discovered a discrete code to turn speaker outputs on and off on a Rotel RA-01 or RA-02?

The stock remote doesn't have these commands, but I find it hard to believe they don't exist somewhere.

Any help would be massively appreciated!

Thanks
Marc

I don't think they exist.
[Link: bwgroup-support.com]

If they do this should be them.

A
Device Code: 83.11 Function: 81
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0E94

B
Device Code: 83.11 Function: 82
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0E94

Thanks, I will try them later.

But you may be right; as I thought about it, it could have been a stupid question. If it were software switchable then you run the risk of the A/B flip switch on the front panel being out of whack with what the amp is actually doing....

Will let you know!

Thanks again
Marc