| Post 1 made on Saturday October 22, 2011 at 18:49 |
I have read all over this forum and searched the WWW. No luck. So I'll just start a thread.
Does anyone have any information on whether the new Haier TV's have discretes? I just put a new Haier LED on a back porch to be controlled by a Crestron Prodigy system. It would be really helpful if I could locate a discrete power on and discrete power off .ccf file.
Anyone have an answer? Maybe another brand's codes that they know work?
Thanks.
|
|
| Post 2 made on Saturday October 22, 2011 at 19:27 |
makitamark Advanced Member |
Joined:
Posts: | April 2004
984 |
|
|
Why not generate the whole codeset and try them all?
If you have the TV to test with it's the perfect opportunity.
|
|
| OP | Post 3 made on Saturday October 22, 2011 at 20:15 |
Explain "generate the whole code set"? I have learned the codes and have the hex values, but the power is toggle only.
|
|
| Post 4 made on Sunday October 23, 2011 at 02:43 |
makitamark Advanced Member |
Joined:
Posts: | April 2004
984 |
|
|
The first step is to identify the code you already have, a program called IRTool will do this for you.
The second step is generating all codes in that set, the number of codes in a set depends upon the protocol of the codeset, but most often there are 255 codes. A program called Makehex will do this for you.
The third step is to test all the codes into your TV.
Both these programs are available here on RC.
Post the code you have and we'll give you some pointers.
Mark
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
