Post 1 made on Saturday December 21, 2002 at 18:27 |
JZZ Lurking Member |
Joined: Posts: | December 2002 5 |
|
|
I was hoping that someone other than me really hated the delay between sending the "on" command and an input command, and was able to figure a way around this. If you have any advice, I would appreciate it.
|
|
Post 2 made on Thursday December 26, 2002 at 17:17 |
bhihifi Long Time Member |
Joined: Posts: | December 2002 15 |
|
|
Since you obviously have other components to turn on to feed the Panny a signal, you can send the power on command, then turn on and configure your other components, then send your input selection. This might give you enough time and also do something useful while you wait. Then it isn't delay anymore ;-)
|
|
Post 3 made on Wednesday February 19, 2003 at 03:12 |
DJS Lurking Member |
Joined: Posts: | February 2003 2 |
|
|
Does anyone have the discrete codes for input and aspect for the Panasonic PT50PD3P?
This message was edited by DJS on 05/31/03 20:16.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.