Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need hex codes for Pioneer SC-35
This thread has 5 replies. Displaying all posts.
Post 1 made on Wednesday August 17, 2011 at 12:07
Dan_BR
Long Time Member
Joined:
Posts:
August 2011
10
I have the full list of these codes from Pioneer, but the ones I am looking for do not work
I need the discreet codes for MCACC 1 thru 6. The discreet codes for these in the IR Database do not work either, only the toggle thru MCACC code.
Any help appreciated

Thanks
Dan

p.s. I am using the mx-880

Last edited by Dan_BR on August 17, 2011 12:51.
Post 2 made on Thursday August 18, 2011 at 00:56
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,792
I have run into a few issues with the pioneer codes as well.

Try using some codes from another model..from another spreadsheet.
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.
OP | Post 3 made on Thursday August 18, 2011 at 09:41
Dan_BR
Long Time Member
Joined:
Posts:
August 2011
10
Thanks, I will give that a try
Post 4 made on Friday August 19, 2011 at 12:39
NSP01
Advanced Member
Joined:
Posts:
March 2005
834
I checked the MCACC Memory 1-6 hex codes in the list at pioneercustom.com and they worked flawlessly with my trusty TSU2000.
Did you copy and paste those codes to the URC remote?
I'll test the URC database codes with a 900 when I get another minute or two.
They call me the "Thread Killer". Just watch!
OP | Post 5 made on Tuesday August 23, 2011 at 19:46
Dan_BR
Long Time Member
Joined:
Posts:
August 2011
10
On August 19, 2011 at 12:39, NSP01 said...
I checked the MCACC Memory 1-6 hex codes in the list at pioneercustom.com and they worked flawlessly with my trusty TSU2000.
Did you copy and paste those codes to the URC remote?
I'll test the URC database codes with a 900 when I get another minute or two.

well they sure did not work for me. i used the hex editor correctly (i believe). Copied the code into the box and then dragged the hex bullseye onto the button and they did not work. None of the codes worked. That is the same list I used also. If you have any suggestions let me know

Thanks
Dan
Post 6 made on Thursday August 25, 2011 at 19:20
NSP01
Advanced Member
Joined:
Posts:
March 2005
834
Dan,
I'm on the road this week but i'll try the URC database this weekend or learn the pronto codes and save them as a URC device. I could email that device too you if it works.
They call me the "Thread Killer". Just watch!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse