I'm at a project that has one SC EVC and I apparently do not have the codes anymore. The supplied remote is not spitting out enough juice for my IR Pro to recognize it and SC says they do not have the codes to send. I need "ON", "OFF", "Vol +", and "Vol -". Can anybody help me out so I finish this project without having to come back?

Thanks in advance!

Are the codes not in EZTools?

No, it would seem.

try these:

OFF
0000 006F 0000 000C 0012 00AD 0012 00AC 0012 00AD 0012 00AD 0012 00AD 0012 010D 0012 00AC 0012 00AC 0012 00AC 0012 00AC 0012 010D 0012 08E4

ON
0000 006F 0000 000C 0012 00AD 0012 00AD 0012 00AD 0012 00AD 0012 00AD 0012 010D 0012 00AC 0012 00AC 0012 00AC 0012 00AC 0012 00AC 0012 0946

VOLUME DOWN
0000 006F 0000 000C 0012 00AD 0012 00AC 0012 00AC 0012 00AD 0012 00AD 0012 010D 0012 00AD 0012 00AC 0012 00AC 0012 010D 0012 010D 0012 0885

VOLUME UP
0000 006F 0000 000C 0012 00AD 0012 00AC 0012 00AC 0012 00AD 0012 00AD 0012 010D 0012 00AD 0012 00AD 0012 00AD 0012 010D 0012 00AD 0012 08E5

Thank you. I ended up using the Elan codes. I called SpeakerCraft tech support and the first guy told me the codes were different between the two. I called again and the next guy said its the exact same VC. The Elan codes worked perfect.