Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Kenwood KRF V5030D
This thread has 8 replies. Displaying all posts.
Post 1 made on Thursday June 30, 2011 at 17:36
mr magoo
Lurking Member
Joined:
Posts:
June 2011
5
Hi have recently dug my old Kenwood amp out of the loft but have lost the control. Does anyone know whether I can program either a Sky+ remote or a very basic one for all URC7120 remote to control the volume.
Have spent ages searching fro codes with no luck, pretty sure that I will not be lucky but if anyone can help...great.
Post 2 made on Friday July 1, 2011 at 01:33
3FG
Select Member
Joined:
Posts:
August 2009
1,857
Does either remote accept setup codes Audio 0313, 1313,1569, or 1570?

Your amp is listed here in the file section, so we know those setup codes will work.
OP | Post 3 made on Friday July 1, 2011 at 18:19
mr magoo
Lurking Member
Joined:
Posts:
June 2011
5
Thanks but none of those seem to work...
Post 4 made on Saturday July 2, 2011 at 00:52
3FG
Select Member
Joined:
Posts:
August 2009
1,857
Do you mean that the remotes did not accept the setup codes (didn't blink twice when you entered the code) or that the remote accepted the setup codes, but the Kenwood didn't respond?
Post 5 made on Saturday July 2, 2011 at 02:59
edmund
Elite Member
Joined:
Posts:
April 2002
13,576
Sure the receiver isn't RF?
OP | Post 6 made on Saturday July 2, 2011 at 03:13
mr magoo
Lurking Member
Joined:
Posts:
June 2011
5
the all for one remote blinks twice with code 1570 but no others blink twice on either remote

Last edited by mr magoo on July 2, 2011 03:22.
OP | Post 7 made on Saturday July 2, 2011 at 03:17
mr magoo
Lurking Member
Joined:
Posts:
June 2011
5
no, but it is the KRF V5030D so that may mean it is. What does that mean?
Post 8 made on Saturday July 2, 2011 at 03:57
edmund
Elite Member
Joined:
Posts:
April 2002
13,576
An IR remote won't control it, unless you can enable IR on it, check your manual. If its RF only, then the only remote that will be able to control it is oem rf remote.
OP | Post 9 made on Saturday July 2, 2011 at 04:31
mr magoo
Lurking Member
Joined:
Posts:
June 2011
5
reckon thats the problem, thanks man.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse