Post 1 made on Wednesday May 18, 2011 at 23:03 |
I've got one of the remotes from Timewarner. I used product code 1516 to program it to control the Blu-Ray changer, and it works fine. However, one small problem is that the select/ok key is not one of the keys that's programmed. The remote can be programmed easily for individual keys (press the program key, press 9-9-4, press program again, etc). The last step is to type in the key code that should be sent via IR when the select key is pressed. Does anyone know the IR key code for the sony select/ok key?
It's supposed to be a code 5 digits or fewer.
Thanks, Mike
|
|
OP | Post 2 made on Thursday May 19, 2011 at 12:46 |
After posting the message I went into the hex codes posted here and did some decoding with a hex editor. I successfully converted the values into decimal and it worked. Here are four keys and their decimal values. I'll post them here so others can use them. Again, this is for the Sony BDP-CX960 (although they should work for the Sony BDP-7000 since the Sony BDP-7000s hex codes were the ones I decoded). Again, this is for programming an individual key on a universal remote. The keys below weren't programmed on my remote, so I programmed therm individually simply using hte directions in the remote's manual. The only thing missing were the key codes to use, which are below.
"Cursor Enter" (the center of the round disc)- 00175 "Return" - 00028 "Home" - 00032 "Options" - 00173
If your remote only uses 3 numbers, then don't use the first two zeros.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.