Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 4
Topic:
Altech DSD4121 Remote Codes
This thread has 48 replies. Displaying posts 1 through 15.
Post 1 made on Thursday May 5, 2011 at 05:35
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
G’day,

I have an Altech DSD4121 Digital Satellite Receiver & a Pronto TSU9400 Remote.

The problem I have is the Pronto learnt the codes from the Altech remote OK, but when I use the Pronto, the Altech Receiver gets the signal but nothing happens, I know the Altech receives the command because there is an LED that lights up on the receiver, but it doesn’t go off, it’s the same result as using the Altech remote & holding the button down & not letting go, nothing happens until you release the button.
My DENON RC-995 universal remote could not even learn the comands from the Altech.

Here are some the learnt codes doing it the normal way.

POWER TOGGLE
0000 006D 000C 0012 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 006C 0008 001D 0008 0022 0008 001D 0008 006C 0008 001D 0008 001D 0008 0C1B 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0042 0008 0047

MENU LEFT
0000 006D 000C 0012 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0052 0008 001D 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1F 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047

EXIT
0000 006D 000C 0012 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0047 0008 001D 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 0C1F 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 001D 0008 0047


I did have some luck doing the "single quick push” technique, these 2 codes work

MENU LEFT
0000 006D 0036 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 022E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0022 0008 004C 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 C760

EXIT
0000 006D 0048 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0047 0008 001D 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 001D 0008 0047 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 001D 0008 0047 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 042A 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 006C 0008 004C 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 C760


Also are there any discrete codes for the Altech as well.


Thanks in advance

Grant
Post 2 made on Thursday May 5, 2011 at 06:00
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Try these,

POWER TOGGLE
Device Code: 71.17 (0x47.0x11) Function: 15 (0x0F)
0000 006D 0012 0012 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 006A 0008 001D 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0041 0008 0046 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2

MENU LEFT
Device Code: 71.17 (0x47.0x11) Function: 140 (0x8C)
0000 006D 0012 0012 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2

EXIT
Device Code: 71.17 (0x47.0x11) Function: 142 (0x8E)
0000 006D 0012 0012 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0046 0008 001D 0008 0022 0008 0046 0008 0065 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 001D 0008 0046 0008 0022 0008 0046 0008 0065 0008 001D 0008 001D 0008 0BF2


These codes seem to be the same as the PACE TDS-850. If the codes above work I have a DB file I can send you.

Last edited by Jasonvp on May 5, 2011 06:09.
OP | Post 3 made on Thursday May 5, 2011 at 06:28
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
Thanks for the quick response Jason, but no luck.

Thanks
Grant
Post 4 made on Thursday May 5, 2011 at 06:42
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Do you get any response at all?

Try these,
POWER TOGGLE
Device Code: 71.17 (0x47.0x11) Function: 15 (0x0F)
0000 006D 0024 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 006A 0008 001D 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0041 0008 0046 0008 0022 0008 001D 0008 006A 0008 001D 0008 001D 0008 0BF2

MENU LEFT
Device Code: 71.17 (0x47.0x11) Function: 140 (0x8C)
0000 006D 0024 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2

EXIT
Device Code: 71.17 (0x47.0x11) Function: 142 (0x8E)
0000 006D 0024 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0046 0008 001D 0008 0022 0008 0046 0008 0065 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 001D 0008 0046 0008 0022 0008 0046 0008 0065 0008 001D 0008 001D 0008 0BF2
OP | Post 5 made on Thursday May 5, 2011 at 06:59
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
Nothing at all.
Post 6 made on Thursday May 5, 2011 at 07:07
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Are you copying and pasting just this part of the code?

0000 006D 0024 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2
OP | Post 7 made on Thursday May 5, 2011 at 07:30
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
Yes
Post 8 made on Thursday May 5, 2011 at 08:33
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
These are all Menu Left. Just trying to get one working and then we can go from there.

A
0000 006D 0024 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 022E
B
0000 006D 0024 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 C760
C
0000 006D 0012 0012 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 022E
D
0000 006D 0012 0012 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 C760
E
0000 006D 0012 0012 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 C760
F
0000 006D 0024 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 C760

Also try increasing the "Duration" to 0.3sec.
OP | Post 9 made on Thursday May 5, 2011 at 09:28
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
A,B,C,D all work, but they all do same thing as I descibed in my 1st post & that is once the button is pressed it stays pressed & won't do anything else, I have to use the Altech remote stop the Pronto.
Hopefully that makes sense.

E and F did not work.

Thanks
Grant
Post 10 made on Thursday May 5, 2011 at 10:06
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Menu Left

G
0000 006D 0012 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E
H
0000 006D 0000 0012 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E
I
0000 006D 0000 0024 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 022E

J
0000 006D 0024 0024 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2

K
0000 006D 0048 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 020D 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0BF2

L
0000 006D 0024 0024 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 042A 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 C760

M
0000 006D 0048 0000 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0051 0008 001D 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 042A 0008 0022 0008 005B 0008 0022 0008 006A 0008 0032 0008 0032 0008 0032 0008 0041 0008 01F0 0008 0022 0008 0027 0008 0046 0008 0022 0008 0046 0008 005B 0008 001D 0008 001D 0008 C760

Last edited by Jasonvp on May 5, 2011 11:22.
OP | Post 11 made on Friday May 6, 2011 at 06:09
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
G,H,I,L,M all work, but still stay on.

J & K didn't work.

How come the "single quick push” technique worked for these 2 codes even though it took quite a few goes to get them to work. Is ther some way of imitating this or adding some extra hex numbers on the end of the standard codes. Just a thought.

MENU LEFT
0000 006D 0036 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0028 0008 0047 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 022E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0022 0008 004C 0008 0022 0008 0047 0008 005C 0008 001D 0008 001D 0008 C760

EXIT
0000 006D 0048 0000 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 0047 0008 001D 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 001D 0008 0047 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 0C1E 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 001D 0008 0047 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 042A 0008 0022 0008 005C 0008 0022 0008 006C 0008 0032 0008 0032 0008 0032 0008 0042 0008 01F0 0008 0022 0008 006C 0008 004C 0008 0022 0008 0047 0008 0067 0008 001D 0008 001D 0008 C760

Grant
Post 12 made on Friday May 6, 2011 at 08:16
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
That is what I tried to do with the I,J,K,L & M codes. I have know idea why they stay on. I do know that XMP IR Protocol can be very hard to learn but I have never heard of this problem before.

Are you loading and sending these commands straight from the remote or using PEP2.4 to send them?

Are you using a RFX Extender?

I'll PM RC member 3FG and John Fine to see if they have any ideas.
OP | Post 13 made on Friday May 6, 2011 at 08:38
grrwmr
Long Time Member
Joined:
Posts:
December 2009
63
I'm not using a RFX Extender.

I'm not sure what you mean about loading and sending the commands??

I'm using PEP3.0 to paste your codes into MY DATABASE then asigning them to buttons in a PROJECT then downloading that into my PRONTO.

Could PEP 3.0 be a problem???
Post 14 made on Friday May 6, 2011 at 08:59
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
On May 6, 2011 at 08:38, grrwmr said...
I'm using PEP3.0 to paste your codes into MY DATABASE then asigning them to buttons in a PROJECT then downloading that into my PRONTO.

Yeah that is what I meant.

The other is to connect the remote to your PC and test them using PEP3.

Could PEP 3.0 be a problem???

I doubt it.

XMP IR Protocol (which is what they are using) is nearly impossible for any remote learn correctly.

When you say it stays on do you mean when you press LEFT it continually goes LEFT whithout holding the button down?
Post 15 made on Friday May 6, 2011 at 09:36
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
On May 5, 2011 at 05:35, grrwmr said...
I did have some luck doing the "single quick push” technique, these 2 codes work

When learning you should only hold the button down for about one second.
Find in this thread:
Page 1 of 4


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse