Hi!
I'm building my hometheater controlling receiver,DVD etc with Global Cache GC-100 and MainLobby. With help from this forum I've got everything to work perfect besides controlling motorized curtains.When learning codes with IRWidget it says protocol f12 .Making codes with MakeHex don't work. Can anyone look at the codes and see if something is missing. Not much to read about protocol F12. Any help appreciated.

code for closing curtain :
Protocol=f12 Device=0.1 Function=16
Device Code: 0.1 (0x00.0x01) Function: 16 (0x10)
0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 053E

code for open curtain :
Protocol=f12 Device=0.1 Function=8
Device Code: 0.1 (0x00.0x01) Function: 8 (0x08)
0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E

code for stop :
Protocol=f12 Device=0.1 Function=4
Device Code: 0.1 (0x00.0x01) Function: 4 (0x04)
0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0010 053E

code for setting to IR channel 8 :
Protocol=f12 Device=0.0 Function=10
Device Code: 0.0 (0x00.0x00) Function: 10 (0x0A)
0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E

Regards Håkan

These codes are generated by MakeHex, right? So of course the codes are "correct" in the sense that the Pronto Hex corresponds to the device and function numbers.

So we need to see the original learns. You can save all of the learns into one ICT file, and please post that. It may make sense to post it in File Section\Diagnosis at hifi-remote.com, becase I don't think there is any way to post a temporary file here.

Thanks for answer. Sorry asking 'stupid' questions, I realize that codes made from MakeHex are 'correct' and can't be investigated further. I made a ICT-file and try post it in the section you named.
Regards Håkan