|
|
|
The following page was printed from RemoteCentral.com:
Finding Discrete code on/off from Toggle...
| |
|
Topic: | Finding Discrete code on/off from Toggle power code? This thread has 4 replies. Displaying all posts. |
|
Post 1 made on Tuesday March 8, 2011 at 15:29 |
rjayeh Lurking Member |
Joined: Posts: | January 2011 4 |
|
|
Can any abody and send me the HEX file for the discrete codes related to the following code, the code is power toggle for AC split unit with certain mode,temp,fanspeed,...etc. i have tried to convert the code by th IR tool , but the protocol result was yamaha,and i didn't find this protocol in Make hex tool. so please help me to solve this problem and send me the Hex file ?
0000 006b 0000 0032 00a9 00a7 0015 003e 0015 0015 0015 003f 0015 003e 0015 0015 0015 0015 0015 003e 0015 0015 0015 0015 0015 003f 0014 0015 0015 0015 0015 003f 0014 003f 0015 0015 0015 003e 0015 003f 0015 0015 0015 003e 0015 003f 0015 003e 0015 003e 0015 003f 0015 003e 0015 0015 0015 003e 0015 0015 0015 0015 0015 0015 0015 0015 0015 0014 0016 0014 0015 003f 0015 0015 0015 003e 0015 003f 0015 003e 0015 003e 0015 0015 0015 0015 0015 0015 0015 003e 0015 0015 0015 0015 0015 0015 0015 0015 0015 003e 0015 003e 0015 00c8
Alternating Code 0000 006b 0000 0032 00aa 00a8 0015 003f 0014 0016 0014 0040 0014 003f 0014 0016 0014 0016 0014 0040 0014 0016 0015 0015 0014 0040 0014 0016 0014 0016 0014 0040 0014 003f 0014 0016 0014 0040 0015 0015 0014 0016 0014 0040 0014 003f 0015 003f 0014 0040 0014 003f 0014 0040 0015 003f 0014 003f 0015 0015 0015 0016 0014 0015 0015 0015 0015 0015 0014 0016 0016 0014 0015 0015 0015 0015 0014 0040 0014 0016 0014 0016 0014 0016 0014 0016 0016 003e 0014 0040 0014 003f 0014 0016 0014 0040 0014 0040 0014 003f 0014 0040 0014 00ca
|
|
Post 2 made on Tuesday March 8, 2011 at 16:17 |
3FG Select Member |
Joined: Posts: | August 2009 1,861 |
|
|
My copy of IRTool decodes these as 48-NEC2 device 77.178, functions 253 and 252. IR tool doesn't decode the E field, but doing it manually shows E =188. There are a potential 65536 different combinations of function and extra values, but you should probably assume that E stays fixed at 188.
The following can be saved as 48-NEC2.irp. Device=77.178 Function=0..255 Define E=188 Protocol=48-NEC2 Frequency=38000 Time Base=564 One=1,-3 Zero=1,-1 Prefix=16,-8 Suffix=1,-8 Form=;*,D:8,S:8,F:8,~F:8,E:8,~E:8,_ 'Prefix=8,-8
I've set Prefix as 16,-8, but your actual data shows Prefix 8,-8. So you may want to try replacing the Prefix line with Prefix=8,-8.
|
|
OP | Post 3 made on Friday March 11, 2011 at 06:16 |
rjayeh Lurking Member |
Joined: Posts: | January 2011 4 |
|
|
On March 8, 2011 at 16:17, 3FG said...
My copy of IRTool decodes these as 48-NEC2 device 77.178, functions 253 and 252. IR tool doesn't decode the E field, but doing it manually shows E =188. There are a potential 65536 different combinations of function and extra values, but you should probably assume that E stays fixed at 188.
The following can be saved as 48-NEC2.irp. Device=77.178 Function=0..255 Define E=188 Protocol=48-NEC2 Frequency=38000 Time Base=564 One=1,-3 Zero=1,-1 Prefix=16,-8 Suffix=1,-8 Form=;*,D:8,S:8,F:8,~F:8,E:8,~E:8,_ 'Prefix=8,-8
I've set Prefix as 16,-8, but your actual data shows Prefix 8,-8. So you may want to try replacing the Prefix line with Prefix=8,-8. Thank You very much, i will try my make hex tool to convert it to HEX file. but could u please send me the link to download your IR tool. Regards
|
|
Post 4 made on Friday March 11, 2011 at 11:22 |
3FG Select Member |
Joined: Posts: | August 2009 1,861 |
|
|
Get MakeHex, MakeHexGUI and IRTool 1.4 from this page. IRTool needs DecodeIR.dll, and probably this is the file you need to get a decode of 48-NEC. 2.41 is the latest released version.
|
|
OP | Post 5 made on Saturday March 12, 2011 at 15:47 |
rjayeh Lurking Member |
Joined: Posts: | January 2011 4 |
|
|
On March 11, 2011 at 11:22, 3FG said...
Get MakeHex, MakeHexGUI and IRTool 1.4 from this page. IRTool needs DecodeIR.dll, and probably this is the file you need to get a decode of 48-NEC. 2.41 is the latest released version. Thank You
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|